Heather giving a session

Antago: Example Session Plans

AUDIO: (No audio)

Response Options:

Back to Antago instructions

You gotta be kidding!


Notes:

PaulsRobot is designed mostly for individuals to act as their own session supervisor, unless there is a professional available who is trained specifically in this stuff. It is usually a bad idea to decide mid-session on a new session plan for the ongoing session. End the session first, take a breather, then work out what to do in the next session.

Here are some sample session plans. You don't have to stick to these, but it might be advisable, at least to begin with. You don't have to do them in the sequence 1, 2, 3, 4. If you want, you can do sessions using 1, 1, 1, 5, 1, 2, 1, 1, 3, 3, 4, 4, or whichever seems appropriate at the time.

Example session plan #1
1. Ensure you're ready for the session, with enough food, sleep, not under the influence, and enough time available in a location where you won't get disturbed by the kids, pets, telephone etc.

2. Follow the instructions exactly as given, especially including the "Rub" part of Rub & Yawn, and end off the session at a good point per the Common (Heather): Session End Point page.


Example session plan #2
[Points 1 and 2 of the first session plan above are understood to apply to each session plan that you do]

3. Continue with the same item/topic as the previous session and see if there is more on it. If not, pick a new topic using the same procedure as in session plan #1.


Notes (continued):

Example session plan #3
[Points 1 and 2 of the first session plan above are understood to apply to each session plan that you do]

3. Use for a topic that hostile item your attention is fixated on right now, namely _____.


Example session plan #4
[Points 1 and 2 of the first session plan above are understood to apply to each session plan that you do]

3. Do the positive treatment thing on a discharged item. Namely, _____.


Example session plan #5
[Points 1 and 2 of the first session plan above are understood to apply to each session plan that you do]

3. Follow the instructions in the troubleshooting section. Do the out-of-session steps first; then if needed the first type of session; then if needed the second type of session.